Mechatronic system desing of a cake decoration robotic module using a SCARA manipulator

H. S.Esteban Villegas, A. F.Aldana Afanador, S. Roa Prada

Producción científica: Libro / Capitulo del libro / InformeLibros de Investigaciónrevisión exhaustiva

Resumen

This article deals with the mechatronic system design of a robotic cake decoration system, following the V-methodology for the design of mechatronic systems. This methodology was selected because it allows for a holistic approach for the design of mechatronic systems, by feeding back information in all the steps of the design process. The component level step of the design process was carried out using a CAD software to get dimensions and to specify the distribution of the system components. With these dimensions and the material selected, a structural analysis was performed using COMSOL Multiphysics ®. This analysis enabled the determination of the critical points of the components, which leaded to the corresponding adjustments. The mathematical modeling for each part of the system indicated that only the manipulator modeling was needed to improve the performance of the controllers. The model of the manipulator was derived by means of a method for Open-Chain manipulators, which takes into account the viscous friction and the inertia tensors obtained from the CAD model. The control strategy selected was a LQG controller, since classical controller, such as a PID controller, cannot be tuned properly for the nonlinear model. After implementing the controller with the nonlinear model, and acquiring data about the manual cake decoration process, it was demonstrated that the newly developed robotic system reduces the cake decoration process time by 24.5% while increasing the accuracy of the pattern drawing process on the cakes.

Idioma originalInglés
Título de la publicación alojada2017 IEEE 3rd Colombian Conference on Automatic Control, CCAC 2017 - Conference Proceedings
EditoresDiego Patino, Eugenio Yime
EditorialInstitute of Electrical and Electronics Engineers Inc.
Páginas1-5
Número de páginas5
ISBN (versión digital)9781538603987
DOI
EstadoPublicada - 2 jul. 2017
Evento3rd IEEE Colombian Conference on Automatic Control, CCAC 2017 - Cartagena, Colombia
Duración: 18 oct. 201720 oct. 2017

Serie de la publicación

Nombre2017 IEEE 3rd Colombian Conference on Automatic Control, CCAC 2017 - Conference Proceedings
Volumen2018-January

Conferencia

Conferencia3rd IEEE Colombian Conference on Automatic Control, CCAC 2017
País/TerritorioColombia
CiudadCartagena
Período18/10/1720/10/17

Huella

Profundice en los temas de investigación de 'Mechatronic system desing of a cake decoration robotic module using a SCARA manipulator'. En conjunto forman una huella única.

Citar esto