Manufacture of hybrid pieces using recycled R-PET, polypropylene PP and cocoa pod husks ash CPHA, by pneumatic injection controlled with LabVIEW Software and Arduino Hardware

A. D. Rincón-Quintero, L. A. Del Portillo-Valdés, A. Meneses-Jacomé, C. G. Cárdenas-Arias, C. L. Sandoval-Rodriguez, J. G. Ascanio-Villabona, B. E. Tarazona-Romero, J. A. Sandoval-Baldión, J. C. Ortiz-Ríos, R. A. Mantilla-Olejua

Producción científica: Artículos / NotasArtículo de la conferenciarevisión exhaustiva

13 Citas (Scopus)

Resumen

The research consists of the design and automation of a pneumatic injector, applying LabVIEW software through an integrated Arduino hardware module, programming through an interface, the pressure that guarantees the geometric quality in the models obtained. The final result shows a piece designed in mass fraction with 40% polypropylene resin (PP), 40% recycled polyethylene terephthalate in the form of scales (R-PET) and 20% from cocoa pod husks ash (CPHA). Likewise, the platform allows to define and control the conditions of generation of the product, defining a pattern according to the type and the mass proportion between the resin of PP, R-PET and CPHA. In addition, the design of the mechanical and thermal elements, consisting of the piston and the system of clamp-type resistors, the pneumatic injection means and the raw material feed gate, improve the efficiency and effectiveness of the equipment.

Idioma originalInglés
Número de artículo012054
PublicaciónIOP Conference Series: Materials Science and Engineering
Volumen844
N.º1
DOI
EstadoPublicada - 29 jun. 2020
Publicado de forma externa
Evento2019 Research, Innovation and Development in Engineering, Expotecnologia 2019 - Cartagena de Indias, Colombia
Duración: 30 oct. 20191 nov. 2019

Huella

Profundice en los temas de investigación de 'Manufacture of hybrid pieces using recycled R-PET, polypropylene PP and cocoa pod husks ash CPHA, by pneumatic injection controlled with LabVIEW Software and Arduino Hardware'. En conjunto forman una huella única.

Citar esto