Automation of a Test Bench for Aluminum Anodizing

Hernando González; Luis Reatiga; Pablo Muñoz; Carlos Julio Arizmendi Pereira

doi:10.1007/978-3-030-40309-6_2

Automation of a Test Bench for Aluminum Anodizing

Hernando González, Luis Reatiga, Pablo Muñoz, Carlos Julio Arizmendi Pereira

Research output: Events › Scientific events › peer-review

Abstract

The paper presents the design of a test bench to perform electrochemical process of anodizing on an aluminum piece. The objective is to analyze the influence of the electrolytic solution, temperature and current in the anodic layer formation. The temperature and current controllers are implemented in an open hardware Arduino technology, which guaranteeing the stability of these variables in the process. A mechanical agitator was also added to maintain the homogeneous solution in the tests. An user interface is designed in LabView, where the variables are monitored in real time and allow the storage of the historical data for later analysis.

Original language	English
Pages	13-21
Number of pages	9
DOIs	https://doi.org/10.1007/978-3-030-40309-6_2
State	Published - 30 Jan 2020

Keywords

Anodizing process
Current controller
PID control
Robust control
Temperature controller

Access to Document

10.1007/978-3-030-40309-6_2

Cite this

@conference{ad0c54bebbc544a3b068279d0cae20e3,

title = "Automation of a Test Bench for Aluminum Anodizing",

abstract = "The paper presents the design of a test bench to perform electrochemical process of anodizing on an aluminum piece. The objective is to analyze the influence of the electrolytic solution, temperature and current in the anodic layer formation. The temperature and current controllers are implemented in an open hardware Arduino technology, which guaranteeing the stability of these variables in the process. A mechanical agitator was also added to maintain the homogeneous solution in the tests. An user interface is designed in LabView, where the variables are monitored in real time and allow the storage of the historical data for later analysis. {\textcopyright} 2020, The Editor(s) (if applicable) and The Author(s), under exclusive license to Springer Nature Switzerland AG.",

keywords = "Anodizing process, Current controller, PID control, Robust control, Temperature controller",

author = "Hernando Gonz{\'a}lez and Luis Reatiga and Pablo Mu{\~n}oz and {Arizmendi Pereira}, {Carlos Julio}",

note = "Publisher Copyright: {\textcopyright} 2020, The Editor(s) (if applicable) and The Author(s), under exclusive license to Springer Nature Switzerland AG.",

year = "2020",

month = jan,

day = "30",

doi = "10.1007/978-3-030-40309-6_2",

language = "Ingl{\'e}s",

pages = "13--21",

}

TY - CONF

T1 - Automation of a Test Bench for Aluminum Anodizing

AU - González, Hernando

AU - Reatiga, Luis

AU - Muñoz, Pablo

AU - Arizmendi Pereira, Carlos Julio

PY - 2020/1/30

Y1 - 2020/1/30

N2 - The paper presents the design of a test bench to perform electrochemical process of anodizing on an aluminum piece. The objective is to analyze the influence of the electrolytic solution, temperature and current in the anodic layer formation. The temperature and current controllers are implemented in an open hardware Arduino technology, which guaranteeing the stability of these variables in the process. A mechanical agitator was also added to maintain the homogeneous solution in the tests. An user interface is designed in LabView, where the variables are monitored in real time and allow the storage of the historical data for later analysis. © 2020, The Editor(s) (if applicable) and The Author(s), under exclusive license to Springer Nature Switzerland AG.

AB - The paper presents the design of a test bench to perform electrochemical process of anodizing on an aluminum piece. The objective is to analyze the influence of the electrolytic solution, temperature and current in the anodic layer formation. The temperature and current controllers are implemented in an open hardware Arduino technology, which guaranteeing the stability of these variables in the process. A mechanical agitator was also added to maintain the homogeneous solution in the tests. An user interface is designed in LabView, where the variables are monitored in real time and allow the storage of the historical data for later analysis. © 2020, The Editor(s) (if applicable) and The Author(s), under exclusive license to Springer Nature Switzerland AG.

KW - Anodizing process

KW - Current controller

KW - PID control

KW - Robust control

KW - Temperature controller

UR - https://link.springer.com/chapter/10.1007/978-3-030-40309-6_2

U2 - 10.1007/978-3-030-40309-6_2

DO - 10.1007/978-3-030-40309-6_2

M3 - Eventos científicos

AN - SCOPUS:85079265999

SP - 13

EP - 21

ER -

Automation of a Test Bench for Aluminum Anodizing

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this